|
Some complex can be molded more accurately using custom-made pressure intensifiers.
|
Molded pressure intensifier that locates using snaps installed on mold surface.
|
|
Molded silicone masks for protecting parts during coating process
|
Extruded and assembled edge seal for transparency laminate.
|
Replacement seals for vacuum frames used in platen presses for manufacturing printed circuit boards
|
Custom extrusions used as fairing bars to reduce stress during vacuum bagging process. Shape on left is two extrusions bonded together due to size and accuracy requirements.
|
Small, seamed high-strength silicone tube.
|
Large, seamed high-strength silicone tube during low-pressure test and inspection.
|
Molded high-strength silicone tube.
|
Molded caul (inside surface shown) to help define part surface during cure.
|
