Putting
wheels underneath a tool frees up table space and adds utility. Putting
a cart or tube structure under a plate allows you to install plumbing
and thermocouple wiring underneath.
Small to mid-size table system with gauge, 3-way valve, and vacuum
regulator for precise control during room-temp bonding.
3' x 10' table for room-temp compacting of plies. Front panel has
a gauge and 3-way valve so operator can easily apply vacuum and vent
tool.
This group of 8 tools is used in 350°F+ temps and pressures up
to 150 psi. Each cart has 2 vacuum connections plumbed to 4 ports
in the plate. 2 thermocouple connections are in the diaphragm. Some
of the tools have a loose diaphragm, specific to the parts they'll
be curing. |