Vacuum Probes
| Vacuum
probes (also called vacuum valves, pucks, sniffers, etc.) are
an efficient means of providing a threaded connection through
different bagging materials and tooling. Torr manufacturers
all of the probes shown here to meet the variety of our customers'
requirements. In addition to complete assemblies, Torr also
sells the individual components that make up the assemblies
(tops, gaskets, bases, etc.). Please refer to our Price
List for more details. |
|
| |
|
|
|
304114
Standard 1/4" Probe
Made for
nylon and other thin film bags, this is our most popular vacuum
probe. Construction is machined aluminum and installs with
a simple 1/4-turn. Probe has 1/4" male npt top with wrench
flats and a round base with non-pinch design. Includes top,
.125" silicone gasket, and base. Click
here for installation instructions.
Dimensions: 2.38" dia x 1.65" tall
|
| |
|
|
|
304124
Standard Probe with Rectangle Base
1/4-turn
aluminum vacuum probe with rectangular base that can fit into
spaces too large for a standard round base, and you can install
the base after sealing the bag. Cut a slot just wide enough
for the base to slip into, insert the base and rotate it so
the slit is aligned with the length of the base, then install
the top as normal. Includes 1/4" male npt top with wrench
flats, .125" silicone gasket, and rectangular base with
non-pinch design.
Dimensions: 1.24" x 3.50" x 1.61" tall |
| |
|
|
|
304334
Filtered Vacuum Probe
1/4-turn
machined aluminum vacuum probe with filtered base. Filter will
block a limited amount of resin and still maintain flow. We
recommend applying a release coating to the probe base if resin
contamination is anticipated. Includes 1/4" male npt top
with wrench flats, .125" silicone gasket, machined aluminum
base with silicone o-ring, and resin filter.
Dimensions: 2.74" dia x 1.85" tall |
| |
|
|
|
308228
Standard
1/2" Probe
High-flow,
1/2" male npt version of our 304114 probe. Construction
is machined aluminum and installs with a simple 1/4-turn. Includes
top with wrench flats, .125" silicone gasket, and base
with non-pinch design.
Dimensions: 2.38" dia x 1.82" tall
|
| |
|
|
|
324114
"Cinch" Aluminum Probe
Installs
like a typical 1/4-turn port but has a rotating cam that adapts
to various material thicknesses and applies greater sealing
pressure due to the compound action of the cam. Includes machined
aluminum 1/4" male npt top with wrench flats, .125"
silicone gasket, and non-pinch design base.
Dimensions: 2.38" dia x 1.90" tall
|
| |
|
|
|
33466Q-10
Stainless Cinch Probe w/Installed 1/4" Snap-Tite Adapter
Separate
the top portion of a 1/4" Snap-Tite quick-disconnect
from the pipe thread adapter and, using the existing O-ring,
screw it directly to the probe top adapter threads. The results
are a low profile port with integral quick-disconnect and
no pipe thread vacuum connection. Probe has our cam-action,
high-pressure Cinch system. Includes stainless steel top with
wrench flats, installed Snap-Tite adapter, .125" silicone
gasket, and stainless steel base with non-pinch design.
Dimensions:
2.38" dia x 2.7" tall
*Also available WITHOUT quick-disconnect installed
(#33466Q)
Dimensions: 2.38" dia x 1.6" tall
|
| |
|
|
|
334664
Stainless Steel Cinch Probe
Stainless
steel version of our 324114 probe. Installs like a typical
1/4-turn port but has a rotating cam that adapts to various
material thicknesses and applies greater sealing pressure
due to the compound action of the cam. Includes stainless
steel 1/4" male npt top with wrench flats, .125"
silicone gasket, and stainless steel base with non-pinch design.
Dimensions: 2.38" dia x 1.90" tall |
| |
|
|
|
353444
4-Piece Hard-Anodized Aluminum 1/4" Probe
This
probe is sometimes referred to as a "3-piece" although
there are actually 4 pieces including the gasket. Our version
accommodates quick-disconnects with a maximum hex size of
7/8" (such as Snap-Tite E series). Machined aluminum
components are hard-anodized for long life. Washer has high-pressure
bump for concentrated sealing force. Includes body with 1/4"
male npt threads, washer (pressure plate), knurled nut, and
.125" silicone gasket.
Dimensions: 2.5"
dia x 2.0" tall
|
| |
|
|
|
364000
1/4" Threaded Probe
Small footprint
machined aluminum port for installing in elastomeric and plastic
film vacuum bags. Includes 1.25" hex, 1/4" male npt
top, silicone gasket, and threaded base. Gasket is available
.063" thick (for bagging materials .06" or thicker)
and .085" thick (for bagging materials thinner than .06")
Dimensions: 1.50" dia x 1.14" tall
|
| |
|
|
|
374000
Thru-Tool Probe
Stainless steel
1/4" male npt port for installing through molds
and plates from .25" to 1.13" thick.
Includes body,
o-ring, washer, spring washer, & nut.
Dimensions: .55" diameter, 90° countersunk head,
2.50" long overall
|
| |
|
|
|
377000
Port Cover
Stainless
steel cover that provides unrestricted flow yet covers exposed
ports in plates, molds, and other fixtures, preventing debris
from entering vacuum lines. Installs directly over holes as
large as .58" diam. Attaches with 2 stainless steel drive
screws (included). Unique design does not hinder flow.
Dimensions: 1.50" diameter x .184" high (not including
domed drive screw heads)
|
| |
|
|
|
UT-7486-2
Thru-Tool Probe
Unique
domed aluminum port that meets the Boeing UT-7286-2 requirements.
Wrench flats on head and 1/4" male npt stem.
Includes stainless steel belleville washer, flat washer and 5/8-11 jam nut.
Dimensions: 1.25" diameter x 1.88" long x .25"
dome height
|
| |
|
| |
|
|
